Document No. 1 — Arad’s Engineering Philosophy and Conceptual Framework
This document is the master document of the collection and establishes the conceptual framework governing the other documents..
Principles of This Document
Principle 1 — Problem and Function Before Hypothesis
Before formulating any hypothesis, the nature and function of the component, as well as its operating conditions, must be properly understood.
Principle 2 — Systematic Investigation Before Material Modification
Before changing the alloy, operating conditions, maintenance and assembly, failure mechanisms, heat treatment, surface engineering, and design must be investigated.
Principle 3 — Design Philosophy as the Starting Point
The design problem, operating conditions, expected service life, safety requirements, and nature of failure must be clarified before making engineering decisions.
Principle 4 — Design as a Means of Predicting the Future
Every design is based on an understanding of future conditions and performance.
Principle 5 — Cost Reduction Through Process Optimization
As far as possible, cost reduction should begin with improving and redesigning the manufacturing process, rather than simply reducing material costs.
Principle 6 — Distinguishing Genuine Improvement from Natural Variations
An engineering improvement is meaningful only when it can be distinguished from the range of natural variations, process tolerances, and operating conditions.
Principle 7 — Evaluation Criteria Before Technology Modification
Before changing a technology, the criteria for measuring and evaluating the decision must be reviewed and validated.
Principle 8 — The Provisional Nature of Engineering Solutions
No engineering solution should be considered final or permanent. Engineers must remain prepared for changing conditions and future needs.